Repair-Home
Find A Contractor
 
 

How soon do you want to begin this project?

Do you own your home?

Zip Code

Home
Home
Plumbing
Electrical
Heating and Cooling
Draperies & Curtains
Doors and Windows
Kitchens
Bathrooms
Outdoors
Walls & Floors
Decor & Home Living
Tools & Materials
Building & Home Improvement
Buying A Home
Forums:
Public Forum
Contact Us
Advertise With Us
Contractors
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
Florida
Georgia
Hawaii
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana
Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Utah
Vermont
Virginia
Washington
Washington DC
West Virginia
Wisconsin
Wyoming

Q&A | Fences : Leaning fence

Title of Question: Leaning fence
 


Name:A. Taylor  City: Lexington TN
Question: I have an 8ft wooden fence about 200ft boundary fence that is leaning and large holes have formed around some of the fence posts from water drainage down the boundary line. The posts are in concrete, bag mix concrete. What do I need to do and do I need more concrete and what kind?

Post Your Answer To The Question Above:

Name:
Your City:
Your Answer:
Name: Dr. Fence PHD | City: Detroit | Date: April 17, 2008, 20:47
Answer: Hard to say, but I'd bet that the post depth isn't sufficient for the panel height and soil conditions. Sandy or loamy or black dirt would require an extremely deep footing considering the fence height and water run-off down this line. More concrete at or near the surface will not fix this. Try digging out the worst looking post - shouldn't be too hard with a hole already around it - if it's not at least 4' in the ground, you've found your problem.

Name: John | City: San Jose,CA | Date: May 19, 2008, 17:57
Answer: I found a great product to help my leaning fence. It is called Fencemender, and I just installed one every other post. It has two steel sleeves that lock together around the post. This was awesome because I didn't have to remove my posts, which is such a hassle. I've had the Fencemenders on for a couple years now, and the fence is still going strong. I DID pour some concrete around the post after installing just for extra strength. I hope that this helps, because it was such an easy solution, and I paid WAY less than I would have with any other advice I found online. You can check it out at www.fencemender.com

Beehive Content Works © 2008
About Us | Advertise With Us | Contact Us | Newsroom | Privacy Policy | Add Your Link | Our Links | CA Privacy Rights