Title of Question:
Replacing a piece of water damaged drywall
Name:Deb City: Fort Wayne
|
| Question: I recently purchased a home that has some damage to a wall due to a leaky water pipe. I need to replace the bottom 1/3 of the wall. I have no idea where to start after purchasing the drywall to replace it. I would like to do the job myself if possible. |
Post Your Answer To The Question Above:
| Answer: There is a learning curve here, but it is a valuable skill to have. First, make sure that the leak problem has been fixed and that there isn't mold in the wall. To install the drywall, you'll need a solid framing section to screw it into. If any wall framing is missing add wooden shims to existing framing to create solid supports for the screws. Measure the opening and cut the drywall to fit tight in the space. Use tape and joint compound to fix the openings between the drywall and wall. It takes practice to "mud" so the compound goes flat on the wall and is not bumpy. I'd ask for instructions from a local paint or home improvement store, then practice on scraps of drywall. You'll do a few coats of mud, letting them dry in between, then sand and prime the opening. Don't be intimidated. It will become much easier the more you do it. Or, call a handyman and ask if he or she can teach you while they fix it. Good luck! If you get stuck, write back! |
|
