| 1. |
Take measurements of the new faceplate, including its width, length and
depth, and chisel holes to enlarge them or fill in gaps with wood putty
or shims as necessary to accommodate the new bolt. If the mortise needs
deepening to accept the new bolt, drill or chisel to the appropriate depth,
making sure you have a smooth bottom to accept the bolt evenly. |
| 2. |
Insert the bolt assembly and install the cover. Next insert the cylinder
assembly drive bar into the slot in the bolt assembly and secure the faceplate
on the exterior door side. |
| 3. |
Test the bolt to make sure it moves freely into the mortise. Once the
width and depth are right, install the striker plate using 3- inch screws
for added strength. To ensure that your locks are in top condition all year-round please consult our section: Latch And Lock Maintenance |
|
